Password Recovery Ways|Tips

“Help! I am in terrible trouble. My HP laptop is locked how I unlock it. I failed to figure out the correct password. I need to login the laptop to get my preparation for the final exam! Is there any way I can unlock it without the password?”

In this situation, the users forgot the Windows login password and made the laptop locked. Here we carried out three methods which can help solved this issues.

Method 1: Unlock HP laptop with third party software

In this situation, we do not know which Windows system the HP laptop is installed. Therefore, the users can remove Windows password with the Windows password remove software.iSunshare WindowsPassword Geniusis one of the such software that makes password remove easily.

How iSunshare Windows Password Genius can help unlock HP laptop?

Here, you should firstly prepare a USB and an accessible laptop for the password reset disk creation. It is also important to make the USB with enough capacity to store the software.

1. Download the program on another accessible laptop and install it.

2. Run the software and choose USB as the media type. Star the process of burning the password reset disk.

3. Restart the locked laptop and press the boot key F9 all the time until it shows you the boot menu. Choose to boot the computer from USB device.

4. Now you can see the iSunshare Windows Password Genius interface and choose the windows and users account. You need to click the Reset button and make the password empty. In this way, you remove the original password. Lastly, reboot the laptop so that you can enter without password to prepare your final examination.

Method 2: Unlock HP laptop with a password reset disk

I doubt that when your laptop is locked, you are all in mess without knowing how to do. Actually, perhaps you have created a password reset disk before. At this time, you should calm down and find where the reset disk is. You can use it to reset the Windows password at once.

1. Connect the disk with the locked laptop and restart it.

2. When it asks you to enter the password, you can enter the wrong password for several times. In the end, you will get a notice on Reset Password.

3. Follow the steps on Password Reset Wizard to reset the HP laptop password. The Password Reset Wizard will guide you to successfully reset the password.

Of course, there are many other ways to reset or remove HP laptop Windows login password, such as factory reset. Considering that the users still need to the data to prepare the final exam, we do not recommend this way in that it will cost the loss of all computer data.

Related Articles:

Howto unlock laptop when forgot password

Howto unlock HP laptop in Windows 10

8Useful Methods for Windows 8 password reset

Everyone will have the precious memory which is stored in iPhone. When you see the photos, videos or messages, something unforgettable will come to your mind. Yet, there is no doubt that iPhone has the large storage for the files. But I think all your data should be treated as much. It is necessary to backup iPhone data through iTunes. You should keep it as a habit to protect your important data.

Learn the definition of backup

Here comes to the question: what’s a backup? By definition, a backup for your iPhone will includes everything: iPhone settings, app data and organization, iMessages, photos, videos and more. For the iPhone users, they can back up the data through iCloud and iTunes. If you get used to backup data via iCloud, you can reach the data stored in the iCloud at anywhere only if you connect the iPhone with Wi-Fi. For the iTunes backup, it is possible to access with the help of computer in that all data is kept safely on your Mac or PC.

Steps to make a backup using iTunes on iPhone

You can turn on the automatically back up following this way: access iTunes> Device icon > Summary > This computer> Encrypt [device] backup. You need to create the password for backup protection. And then click Done to accomplish the setting.

If you want to backup the iPhone manually via iTunes, here are the tutorials.

Step 1: Connect your iPhone to the computer. You can use the Mac or Windows PC.

Step 2: Run iTunes and you will find there is Device icon close to the category dropdown menu. Click it and choose Summary from the sidebar.

Step 3: Under the Manually Back Up and Restore, you will find the option Back Up Now. Click it and you will get the Done option to end this settings.

Extra tips: Forgot iTunes backup password, what can I do?

As we know that there will be a password set to protect the iTunes backup, you cannot access to the iTunes and reach the important data if you forgot the password. And there is no way to retrieve the iTunes backup password unless you utilize the third party software. iSunshare iTunes Password Genius is one of such iTunes backup password recovery software that can help to recover iTunes backup password. You just need to import the encrypted files and set the password recovery method, the software can automatically find your password.

iTunes backup password recovery software

All in all, it just cost you minutes to backup iPhone through iTunes. But you can benefit a lot for a long time. Go and backup the impressive photos, videos and messages now.

More articles about iPhone:

How to Update iPhone to iOS 12
Tips to keep your iPhone data safe
Three ways to hard reset iPhone

For iPhone users, iTunes backup is an important way for them to store photos, music and other data. And most of us will set a password to protect the iTunes backup data from stealing. It is super easy for you to get access to the backup with password. However, when you forgot iTunes backup password, the iPhone backup locked you out of the data you need, how to recover iTunesbackup password from PC? Most of us know that there is no way such as Apple online customer service to retrieve the password. In a situation like this, we summed up two methods here which is proved effective by other users.

Method 1: Test all possible passwords

In this situation, when we get the incorrect password message, what comes to our mind at the first time is to test all possible passwords we may use. For that there are a bulk of passwords using in our daily life, we may mix them up, you can write down the most frequently passwords you use and input it one by one to guess the right password. You can try:

l Your iCloud password or the Windows login password.

l Your birthday or the Memorial Day.

l The simple combination of digits and alphabets, such as abc123.

l The social media login password or your phone number.

l Ask your best friends or family to provide some passwords they know

Method 2: Use iTunes backup password recovery tool (Windows/Mac)

If you fail to think of the iTunes backup password, in order to help you out of the trouble, you should try the iTunes backup password recovery tool to begin the automatically guessing process. At this time, considering all aspects of the software, such as compatibility and price, most of the websites recommend iSunshare iTunes Password Genius, which is the most trust-worthy tool within the industry. There are two versions of this iTunes backup password recovery tool: Windows and Mac. In addition, the software is developed with four password recovery methods for user options. You can free download the iSunshare iTunes Password Genius Mac trial version to have a test.

Here, I will take the Mac version of this iTunes backup password recovery tool as an example to show you how to process the automatically password recovery steps.

Step 1: Install the software on your Mac and run it.

For Mac users, they are familiar to the software install process. After downloading, you can drag the icon to the application folder and then click it to run the program.

Step 2: Import the encrypted iTunes backup files.

When you run the software, you will see the Open File button on the first line under the navigation bar. Click it and you can choose the iTunes backup file of your iOS device. If the software cannot detect your iTunes backup file, the software enables you to import the file manually by clicking Add File button.

Step 3: Make a decision on the password recovery type

iSunshare iTunes Password Genius for Mac offers users four types: Brute-force, Mask, Dictionary and Smart. Just take the Brute-force as an example, you should click the Brute-force type and then give clues on the range, length, dictionary and so on.

Step 4: Begin the password recovery process and get the password

It is super easy to make the software find the iTunes backup password for you. Click the Start button and you just need to wait for the last result. Once it successfully gets your right password, it will show it to you at once. Of course, if you have something emergency to do, you can stop the process and when you run it next time, it will continue it automatically.

Now, you will never be puzzle about the how to recover iTunes backup password from PC. Go and have a test by yourself now.

Related articles about iTunes :

How to choose iTunes backup password recovery tool

How to backup iPhone data via iTunes

Ways to find back iTunes password

I had a problem on opening the password-protected Excel workbook recently. I asked the person who built the Excel for the password but he failed to remember it. My document is in Excel 2010 so that I search online about how to unlock an Excel spreadsheet. In the following, I will tell you my test in details.

Test 1: Try to unlock the Excel with VBA mode

Just as the screenshots, I found the specific steps to open Excel file without the password. It said that you could enter the VBA mode to copy the code for password recovery. But I failed at the first step.

When I opened my Excel spreadsheet, there was only a box asking me to enter the password. There was nothing when I entered Alt + F11. If I closed the file and did the operation again, I could open the Visual Basic Editor. However, there is nothing I need and I am unable to open the locked Excel. I gave up this way and summed up the reason: the failure may cause by the multiple sheets in my Excel document.

Test 2: Recover the password with iSunshare Excel Password Genius

I know this Excel password recovery software from a forum. As I failed in the VBA mode which is recommended by most sites, I decided to try iSunshare Excel Password Genius. I had some doubts about whether it can recover my Excel password and whether it will damage my data. Considering this factor, I did not purchase the full version at once.

As they provide the free version that can recover the password within three characters, I downloaded it on my computer. At the same time, I created another password-protected Excel which I know the password. According to the tutorial, I added the encrypted Excel file and chose the password recovery method—Normal. As this is my first time and I know the password, I just set the details with the confirmation to All digits option. These can be done in minutes.

recover Excel forgotten password with Excel Password Genius

At last, I clicked the Start button and wondered whether it could give me the right password. To my surprise, I got the password result within minutes. Of course, I opened it directly to verify whether there was data loss. Luckily, nothing has been changed.

You can guess what I do next. I purchased the full version in $19.95 without hesitation and get my complex password for the Excel workbook which I forgot the password. Attention, for this password recovery, it needs more time than the one I tested.

Test 3: Remove Excel password

I noticed that iSunshare also developed the Excel Password Remover that can help to remove the forgotten password within one click. Therefore, I think it would be a better way if it could help me remove Excel 2010 password. But I was told that it could only support MS Excel 97/2000/2003/XP. Hope it can be improved in the future.

Article about Excel:

How to change or remove Excel sheet password protection
How to fix Gibberish output in csv file when opened by Excel
Create a dynamic dashboard in Excel 2010

Although Microsoft does not enable BitLocker feature on macOS & Mac OSX, there is an intelligent way to decrypt the USB which is encrypted with BitLocker on Mac. Now let’s explore how to unlock the USB on Mac with BitLocker Genius.

Why Choose iSunshare BitLocker Genius?

iSunshare BitLocker Genius is the useful and secure BitLocker reader for Mac which enables users to open/ read/access the BitLocker encrypted USB without any data at risk. Within several clicks, you can decrypt the USB on Mac and move the files or images between the USB and Mac. This software offers you two ways to unlock the drive: use the BitLocker password or the Recovery key file. There is no doubt that it is extremely easy to get the USB decrypted with the encryption password.

Step 1: Launch the software and insert the USB on Mac

First of all, you should be the paid user of this software so that you can enjoy the full features. After the download and installation process, you can insert the USB into Mac laptop and then you will get it appeared on the software user interface as the screenshot showcases.

Step 2: Select the USB and click the Unlock Button

The disk with the “bitlcoker” Mask should be chosen here. Only after you make your option, the Unlock button will display on the toolbar. Click it without hesitation as you can. It will not cause any data loss.

Step 3: Mount the USB with BitLocker Password

In this interface, you can enter the password for the BitLocker USB or use the recovery key file to decrypt the USB. Undoubtedly, the password is the top-priority option for most of the users. After you input the password, it is time to click the Mount button.

Step 4: Open, read and access the USB drive

By now, the USB drive is decrypted on the desktop and you can simply open, read and access it as freely as you are in Windows PC. The USB drive is on your control now. You can add files into the drive or copy the files from the drive to Mac. If you finish all you want to do with the USB on Mac, you can click the Eject button on the toolbar. All the data will be kept safely on the USB.

Related articles:

Remove BitLocker from Pen Drive with/without Recovery Key

How to Decrypt the BitLocker Encrypted USB on Windows and Linux

How to Allow BitLocker without a Compatible TPM Windows 10
Operational System Differences--Linux/Windows/Chrome/Mac OSX

“My brother sent me a MacBook Pro arriving in a few days. And I already backed up my documents on Windows 7 laptop to an external HDD with BitLocker encryption. I did not know that he would buy me OSX laptop and I thought it would be a Windows Notebook which I only need to enter the password to transfer the documents. Now my issue is that how can I make the BitLocker external HDD readable in OSX. My MacBook is big enough to store the documents. Is there any tool out there that will allow me to use this drive with the Windows encryption in OSX?

Do you think is it possible to open and read the HDD drive with Windows 7 BitLocker on MacBook Pro? Yes, now Mac users can unlock the BitLocker encryption external hard drive on Macwith iSunshare BitLocker Genius—the software which opens a door to reach the BitLocker contents safely.

Of course, you can choose to transfer the documents through the network if your Windows 7 computer is alongside. But With iSunshare BitLocker Genius, you can read a Windows 7 BitLocker drive in OSX in minutes with following tutorials.

First of all, you should download and install iSunshare BitLocker Genius on your MacBook Pro. It will take you minutes. Also, you need to register the software to be the paid users so that you can enjoy the intelligent functions.

Then, you should connect the external HDD with your Macbook and run iSunshare BitLocker Genius. The software will detect your drive and mark it with a BitLocker text under Encrypt category. Click the drive and choose the Unlock button on the top toolbar interface.

On the continue interface, you will be given two methods to read the Windows 7 BitLocker drive in OSX. The first one is to type the BitLocker password to mount the HDD. It is perfect for the above user to use the drive. The other method is to import the BitLocker recovery key file and unlock the drive. For those who back up the recovery key on the cloud, they can download it on Mac OSX and utilize it to unlock the drive.

mount the Windows 7 BitLocker drive with password

After the important steps, your external HDD will be unlocked and appear on Macbook desktop and you can freely transfer the documents into your Mac. After you finish the transformation, you can click the Eject button to disconnect the external HDD and enjoy your Macbook using experience.

Related Articles:

4 Situations to Unlock BitLocker Drive When Forgot Password

What is BitLocker Recovery Key and How to Find it

How to Turn Off BitLocker on Windows 8

How to Open BitLocker Drive USB SD Card onMac OSX

Failed to enter the correct password of BitLocker USB? Microsoft has taken this situation into consideration so that it developed the recovery key feature for the BitLocker function. When the password is lost or forgotten, users can use the back-up recovery key or recovery key file to unlock the BitLocker USB drive. Here we summed up 3 methods for users to open the BitLocker USB drive with recovery key.

Method 1: Unlock BitLocker USB Drive with Recovery Key Directly in Windows

In Windows default settings, when you insert the BitLocker USB drive and are going to open it, there will be more than one option. If you lost the password, you should get BitLocker recovery key firstly. Then click the drive and choose fewer options to get Enter recovery key option. Next, you need to find the 48-digit recovery key from your backup file and enter it to unlock BitLocker USB drive.

Method 2: Open BitLocker USB Drive with Recovery Key File on Mac

If you have no Windows laptop for working and have no BitLocker password, how could you an open BitLocker USB drive with recovery key file on Mac? You only need a helper: iSunshare BitLocker Genius. With iSunshare BitLocker Genius and the recovery key files, you can unlock the BitLocker USB drive with following steps: Launch the software, choose the disk and click Unlock button, add the recovery key file and click Mount Button. Within minutes, you can see that the drive is shown on the Mac desktop.

Open BitLocker drive on Mac with recovery key file

Method 3: Access BitLocker USB with Recovery Key through Command Prompt

If you are a computer professional worker, there is another way for you to unlock the BitLocker USB drive. This way is only for Windows users. You can run the command prompt as an administrator and type the commands: manage-bde -unlock F: -RecoveryPassword YOUR-BITLOCKER-RECOVERY-KEY , press Enter and the drive will get unlocked at last.

unlock BitLocker drive via command prompt

Related Articles:

4 Situations to Unlock BitLocker Drive without Password

4 Ways to Remove BitLocker Encryption onWindows 10

How to Read a Windows 7 BitLocker Drive in OSX

4 Option to Getting BitLocker Recovery Key

“When I inserted my SanDisk 4GB USB thumb drive into my MacBook, it tells me that there is an error: the disk you inserted was not readable by this computer. I did not know what happened. I did not want to initialize it as I have important data on it. Is there any solution for this issue? What makes the error happen?”

When you get the error message “the disk you inserted was not readable by this computer” on MacBook, don’t worry. Firstly, we should know the reasons for this error and find out the solutions. Here, we will discuss both of them together.

Case 1: Reconnect the USB thumb drive

For most of the people, the reason for the unreadable USB thumb drive may be the faulty USB port or cable. So the first thing you should do is to check whether there is a faulty connection or not. Just make the USB thumb drive connected to MacBook in another USB port or cable. If you do not get such message, you can make sure that the error is caused by the faulty USB port/cable.

Case 2: Check the error with Mac in-built repair tool

If there is no faulty in your USB port, you can check the error with Mac in-built repair error: Disk Utility. You need to find and click Applications> Utilities> Disk Utility. After that, choose your own SanDisk USB thumb drive and hit First Aid. The First Aid option will help you check the minor error and repair it.

Case 3: The USB thumb drive is encrypted with BitLocker password.

If your USB thumb drive is still unreadable even after First Aid, in this case, the drive might be encrypted with BitLocker password before in Windows computer. And we are unable to open and read the BitLocker protected USB thumb drive on MacBook directly. In order to solve this issue, you can make good use of the small utility—BitLocker Genius to unlock the drive on MacBook with password or recovery key file.

Step 1: Download, install and register the software on your MacBook. It will cost you a few minutes to do it.

Step 2: Open the software and you can see that your USB thumb drive appears on its interface with “bitlocker” label. Hit the drive and click the Unlock button.

click BitLocker drive and the Unlock button

Step 3: Here, you can either enter the password or add the recovery key file to unlock the BitLocker USB thumb drive. And you can get the USB thumb drive readable on MacBook after clicking Mount button.

Unlock BitLocker drive with password or recovery key

Step 4: Your USB thumb drive is displayed on the MacBook desktop. And now you can open, read and write the drive easily. When you want to disconnect it, just click the Eject button on the software.

Case 4: Format the USB thumb drive

If your USB thumb drive is not protected by BitLocker or you lost the password and recovery key file, the only way you can do it is to format the drive at the cost of data loss. But you can recover the data from unreadable drive firstly on MacBook. How can we get the data from an unreadable USB thumb drive? You will find the Mac data recovery software useful. Search online and find the one that meets your requirement.

After you recover data from the USB thumb drive, you can enter Applications> Utilities > Disk Utility. Then choose your USB drive and click the Erase button.

Related Articles:

How to Access USB Flash Drive with BitLocker Password Protection on macOS

Fixed—Disk Unreadable Error on Mac High Sierra

Unlock a BitLocker Drive with or without Password and Recovery Key on Mac

Mount/unmount BitLocker Encrypted Drive in Mac OSX

2 Ways to Remove BitLocker from USB Stickson Mac

“I have a data drive with the BitLocker protection. And I do not bring my own Windows 7 laptop here. Can I open/unlock BitLocker encrypted drive in a different computer, such as Mac? I have the BitLocker password now.”

Can I unlock BitLocker drive on a different computer

Now in this article, we will show you the ways to open/unlock BitLocker encrypted drive in a different computer: macOS/Mac OSX and Windows 10 computer. With the BitLocker password, it is quite easy for you to gain access to the data inside the drive.

How to open/unlock BitLocker encrypted data drive on Mac.

If it happens to be a macOS or Mac OSX alongside, you need a third-party tool to make the BitLocker encrypted data drive readable on Mac as you will get the error message “The drive you inserted was not readable by this computer” when you inserted the data drive into Mac. When it comes to the BitLocker unlock tool for Mac, iSunshare BitLocker Genius is highly recommended. This software empowers users to unlock the BitLocker data drive in a quite easy way. For the users who have the BitLocker password, they just need to input the password and make it accessible in seconds.

Step-1: Access the BitLocker Genius after you installed it on your Mac. Meanwhile, insert the BitLocker data drive into Mac and click Ignore button when you see the error message. As a result, in the intuitive user interface of BitLocker Genius, you can see the BitLocker drive in a glance.

Step-2: It is time to get the unlock options. You need to click the BitLocker data drive with “bitlocker” mark and then go to the Unlock button and hit it.

unlock option in the BitLocker unlocl tool for mac

Step-3: Here, the simplest way to unlock the BitLocker drive is to enter the password and click the Mount button. For the users who do not own the password at the emergency time, they can utilize the recovery key file on the condition that you backed up the recovery key file online. In such a case, you can download the file and add it into the software to mount the BitLocker data drive.

two ways to unlock the BitLocker drive on Mac

Step 4: The BitLocker data drive is unlocked on the Mac desktop. Also, in the software interface, you will see there is a new data drive which is labeled with “Unlocked from disk 1s1”. You can open and access the drive on the desktop. Besides, you can copy and share the contents in the drive.

the BitLocker drive is unlocked on Mac desktop

It is worth mentioning that after you successfully deal with the data in the drive, you need to click the Eject button on the software to make the BitLocker disk disconnected.

Two ways to unlock/open BitLocker drive on Windows 10 computer

Here, it is no need to resort to any tool to unlock BitLocker drive if you have the password or recovery key as BitLocker function is the unique feature of Microsoft. In the following, two ways are listed for you to open the BitLocker data drive. Before we move to the specific steps, you need to check whether the Windows 10 edition supports BitLocker encryption or decryption or not.

Way 1: Directly unlock the BitLocker drive with password or recovery key

After your plug the BitLocker data drive on Windows 10, you can find it on your PC and click to get the password option. Enter your password and the whole drive will be unlocked immediately. If you forget the password, you can use click Fewer options to get the recovery key option and then input the 48-digit recovery key. No matter which option you choose, you can make it unlocked at once.

directly open BitLocker drive in Windows10

Way 2: Open the BitLocker data drive via Command Prompt

It will be easier for those who are talented in programming. They just need to run the command prompt as an administrator and enter these commands: manage-bde –unlock H: -RecoveryPassword YOUR-BITLOCKER-RECOVERY-KEY . Here, the character H means the character for your drive and YOUR-RECOVERY-KEY means you need to enter the 48-digits here. After executing the commands, your drive will be unlocked soon.

using command prompt to unlock BitLocker in Windows 10

Related Articles:

Case 1：Can I clone system partition to a new drive?

“I bought a new SSD and want to upgrade my computer. I added it to my computer a week ago and now I want to clone system partition to SSD. But the problem is if I just copy-and-paste all programs and files, the computer cannot be booted from the SSD. So I want to know if there is partition clone software that can help me to clone the entire system partition.”

Case 2: How can I backup computer partition quickly?

“In my working computer, I placed all the needed software and files in a partition. And now the company is going to get a new computer for us. How can I backup or move the working data into a hard drive or transfer it into my new computer? They are so important in my working!”

Case 3: The partition has little space, what can I do for the pictures and videos files?

“As you know, we all have the unforgettable memories. All the photos and videos that can remind me of the happy times are stored on my laptop. I collected them together in one partition. But as time went by, there are little space in the partition and my computer run slowly. I want to back up the partition to my USB mass storage device. How can I do it effectively?”

Backup Windows 10/8/7 Computer Partition to A New Hard Drive

Are you having a similar issue as the above-mentioned problems? If you want to clone or backup the computer partition to another hard drive, SSD/ HDD or even the USB mass storage devices, just relax and follow the solutions here to clone the partition.

First, download the free partition backup software

To make the partition data clone process easy for you, we highly recommend you a free partition backup software—iSunshare CloneGo, which can help you to clone/backup the Windows OS and partition with simple clicks. You can download and install it on your PC and enjoy the 7-days free usage for all functions.

Second how to backup Windows computer partition to a new hard drive

No matter you are using the Windows 10/8/7 system on a computer, no matter you are going to backup system partition or other partition, iSunshare CloneGo can help you to do that without any data loss or damage.

Step 1: Run iSunshare CloneGo and enable the Copy feature. You can see in the right menus that all the partitions are listed here. The partitions in different hard drive will be named differently. For example, here, C, D, E, and F partition are in the dynamic disk.

Step 2: Select the source target. It can be the system partition or other partition where all your data are in. We selected the F data partition here from the dynamic disk.

Step 3: Select the destination target. It should be any partition in the new hard drive. We selected H as the destination target. And you can know from the list information that H and I partition belongs to another hard drive: HD 0.

select the destination partition from SSD

Step 4: Click the Start button to begin the clone process, and then click the OK button to make sure you know about the format of destination partition.

Step 5: After this, the selected partition will be copied as fast as possible. You can view the copy process and get successful tips when it is done.

After that, if you clone the system partition, you can restart the computer and boot it from the new SSD. If you just backup the data partition, you can go directly to the destination partition to have a check of the data.

Related Articles:

How does your computer work? Does it meet with your increasing the working requirement? If you feel it is out of date and want to upgrade the hard drive to a new and larger one, how can you deal with the software and data in it? How can you make the new hard drive works smoothly with all the same configurations and settings? You can find an easy and safe solution here.

From my point of view, the novices are eager for a safe and convenient way to transfer the Windows 10/7 OS and partition to SSD. So am I! Some people may choose to simply install the new SSD instead of the original hard drive. As a result, they need to reinstall Windows OS and all other tools again, which will waste much time to do the annoying operations for novices. As a matter of fact, I found the much safer, faster and more convenient way to do an exactly hard drive clone to SSD. You just need the free Windows cloning software—iSunshare CloneGo and a larger SSD.

iSunshare CloneGo is free Windows cloning software that is perfect for users to clone hard drive in Windows 10/7. You need to pay attention that this software only copies one partition to another partition so that you need to clone the hard drive partition-to-partition. Do not worry, you just need to do simple clicks and wait for the process end. There is also an extra feature of CloneGo, you can use this program to perform Windows 10/7 system or partition backup and restore operations. Let’s take the system partition as an example and see how to clone one partition from hard drive to SSD now!

How to clone one partition from hard drive to SSD?

To Clone an old hard drive to SSD, iSunshare CloneGo is one of the best and free choices because of its intuitive interface and powerful functions.

1. Launch CloneGo Windows cloning software and click Copy. And then select the C drive partition to be the source target.

2. Select the destination target to store the data from C drive partition.

set partition from SSD as destination target

Tips:

l The destination target should be the partition of SSD. It must be 10% larger than the source target.

l You should initialize the SSD if it is new and add the same volumes so that it can be kept data as the same as your hard drive.

l If there is any data in the SSD, backup it in advance.

3. Click Start and you will get the format pop-up box. Click OK and the partition clone process begins.

start the hard drive clone to SSD process

After the clone process end, you can go to clone other partitions from hard drive to SSD. You should keep in mind that the copy process will format the destination partition so that you cannot choose the same partition for each clone process. When you finish the hard drive clone, you can restart the computer and keep pressing Del key to enter UEFI Bios settings. Then set the computer to boot from SSD. You can now have a check whether the SSD with copied system and partition can work normally or not!

Related Articles:

“I upgrade my computer from Windows 7 to Windows 10 a few months ago with the help of my friends. Now the computer runs slowly and I want to replace the old hard drive disk to a better solid state drive. I bought the SSD online but I am hesitated to install it. I am unable to install the Windows 10 by myself and I don’t want to trouble my friend again. What’s more important, I do not want to lose the settings of my Windows 10 operation system. Is there any easy way to clone Windows 10 system from HDD to SSD without reinstallation and no data loss? I really need it!”

clone Windows system partition to SSD with CloneGo

It is true that we need to clone Windows 10 from HDD to SSD sometimes as to save time and efforts. For example, move Windows 10 from your desktop computer to a new laptop and replace the old HDD with SSD. But most people have no idea about how to make the Windows 10 system clone completely. Due to this reason, we would introduce iSunshare CloneGo—the powerful but easy to use Windows cloning software here as well as show you how to clone Windows 10 system from HDD to SSDwithin few steps.

Steps to do Windows 10 System Clone with iSunshare CloneGo

iSunshare CloneGo is the third-party Windows cloning software which is qualified for system and partition copy and backup. Everyone can free download this program to copy/clone Windows 10 OS easily with no data loss.

Step 1: Make your SSD connected with your desktop or laptop computer. Meanwhile, initialize the SSD and add more volumes.

Step 2: Open iSunshare CloneGo and click Copy. The current system partition and your SSD partition will be automatically deleted by the program and get listed on the interface with details.

click Copy to view all partitions info in CloneGo

Step 3: Choose the Windows 10 OS partition as the source target and choose a volume from SSD with enough space to store the Windows 10 system data.

choose source system partition and SSD destination partition

Step 4: Click Start and get a text box saying that this operation will format the destination target. You should click OK when the SSD partition is new with no data.

The software will help you clone Windows 10 system automatically. When the process ended, you can try to reboot your computer from the SSD. Believe it or not, CloneGo is efficient in hard drive upgrade, system backup, and data transfer. It has the external Backup and Restore features for the Windows system and data. Everyone can try it now for free!

Related Articles:

“I am going to replace my 240GB Toshiba SSD of the 1TB Samsung SSD because the 240 GB SSD is just about full. I’d like to move everything, the OS, the software and etc. to the new SSD. Is there any simple and free software to clone SSD to a larger SSD in Windows 10? I definitely do not want any data loss!”

Did you take the capacity of your hard drive when you buy the computer? If you get a small capacity solid state drive in your computer, what can you do if there is almost no space in it? Yes, you have two choices, buy another large capacity computer or replace the small SSD with the larger SSD. Most people will choose the latter option. But if you directly install the larger SSD on the computer, you will lose all data of your original SSD. Definitely, you need to reinstall the Windows OS and all programs you need. At this time, the SSD to SSD cloning softwarewill be a great help, which will move everything from the old SSD to the new one.

With the SSD to SSD cloning software to deal with the system clone and data clone process, you can be relaxed to do this job and extend your computer life. iSunshare CloneGois chosen as the best free SSD clone software here to end your trouble in SSD cloning for that:

l 7-Day free trial of all powerful functions

l Intuitive software design makes it easy to use for everyone

l Partition-to-partition cloning, with no need to reinstall the Windows system and software, ensure the identical using experience as the old SSD.

l Two modes: Copy and Backup. Both can help to duplicate the SSD to a larger SSD and make it bootable.

You can download this SSD clone software here and apply it to clone smaller SSD to larger SSD personally. Also, you can apply your old SSD system to any computers by using the Backup and Restore feature.

Tutorial: Clone SSD to Larger SSD in Windows 10 with iSunshare SSD Cloning Software

Once you download iSunshare CloneGo on your Windows 10 computer, you can finish the installing as soon as possible. At the same time, you should make the larger SSD connected in the correct way. This SSD cloning software supports all popular brands of solid state drives, such as Samsung, Toshiba, Seagate and etc. Due to this software adopts the partition-to-partition mode; you need to clone all partitions to new SSD one by one. Here, we will take the system partition clone as an example.

1. Run iSunshare CloneGo and choose “Copy” feature.

2. Select the old SSD system partition, the C drive as the source target.

3. Select one partition from the new larger SSD as the destination target.

select one partition from the larger SSD

4. Click “Start” and get the format notice, click “OK” to perform the cloning procedure.

Click Start to perform the cloning procedure

After the system partition clone ends, you can repeat these steps to clone other partition from the old SSD to new SSD. It is worth noting that you should keep the number of volumes in new SSD the same as the old one. In this way, you can clone the partition correspondingly one by one. In the end, you can boot the computer from the new SSD.

Related Articles:

“I bought a new WD 4TB external USB 3.0 portable hard drive. And I used the WD 500GB with only one volume before. Both are using the NTFS system. Now I want to clone the data from old WD hard drive to the 4TB one. But I do not know whether there is a simple way to do that. I do not want to copy and paste the documents and files one by one.”

For the users who want to transfer data from one external hard drive to another, it seems to be a big project to deal with a larger number of files. Here, you will get the super easy way toclone external hard drive to another external hard drive in Windows. Besides, you can get ideas to back up an external hard drive to another.

clone external hard drive to another in Windows

How to Clone External Hard Drive in Windows

Yes, you need a helpful tool to finish this data migration task. iSunshare CloneGo is highly recommended here to clone the external hard drive. It is free to download to clone and backup any NTFS drive to another hard drive in the partition to partition mode.

Step 1: Plug the two WD external hard drives into available USB ports. Then, the Windows computer will recognize it and allocate a drive letter to them.

Step 2: If there is a new external hard drive, you need to initialize and allocate new volumes to it.

Step 3:Download iSunshare CloneGo program and make it installed on your Windows computer. It will take a few minutes to do it.

Step 4: Open CloneGo and select the source hard drive and destination hard drive partition.

Here, you need to pay attention that if your source hard drive (500G WD hard drive) only has one volume; you just need to choose it as the source target. If there are multiple volumes in it, you need to clone it one by one.

As for the destination target, it should be any partition from another larger external hard drive (4TB WD external hard drive). The partition chosen here will be formatted later.

Step 5: Start the cloning process.

After you click the Start button, you will get a prompt about the format tips. You need to confirm it and then the data clone from external hard drive to another external hard drive begins.

Also, you can apply this way to clone the external hard drive to internal hard drive partition. The essential thing you need to take care of is the internal hard drive partition should have enough space to hold the data.

External tips: How to Backup External Hard Drive to Another with CloneGo

If you want to back up external hard drive data, you can also use CloneGo to create a backup to another external hard drive. It is as easy as the partition clone process:

Run CloneGo and choose Backup.
Select the external hard drive you want to back up.
Set a destination to save the backup file.
Click Start and allow the backup operation.
Get the compressed backup file.

Related Articles:

Volume Shadow Copy Service, or Shadow copy, VSS, plays an important role in the backups and system restores of computer volumes or files. This post shows you specific methods to solve the issue that the Volume ShadowCopy Service is not working in two cases.

Case 1: Volume Shadow Copy not Working when Backing up Windows

When you get the error messages 0x80042302, 0x807800A1, or 0x800423F4 during the Windows backup process, the most useful way for you to get this issue solved is to check and enable the Volume Shadow Copy Service. Here, we summary two ways to set Volume Shadow Copy Service to Automatic.

Way 1: Enter Windows service via searching

Step-1: Type “service” in Windows search toolbar and click Service.

Step-2: Find Volume Shadow Copy service and click the Start button.

Step-3: Right-click Volume Shadow Copy service and click Properties

right click to get VSS properties option

Step-4: Change the Startup type to Automatic, and then click Apply and OK.

Way 2: Enter service via msc

Step-1: Press Win + R keys on the keyboard.

Step-2: Enter services.msc and press Enter key to open Service Windows.

Step-3: Find Volume Shadow Copy and choose Properties after you right click it.

Step-4: Set the Startup type to Automatic and click the Start button.

Step-5: Click Apply, and then OK button to run Volume Shadow Copy service.

Cases 2: Volume Shadow Copy Service is not Working when Restoring System

It is annoying when you get such message during the system restore “There was an unexpected error in the property page: the Volume Shadow Copy Service used by System Restore is not working…” What should we do to fix this Windows VSS error?

Solutions to this issue:

Way 1: You can enable Volume Copy following the above steps.

Way 2: Change the system restore settings.

Step-1: Search Edit group policy in Windows search toolbar and click to enter Local Group Policy Editor.

Step-2: Access Computer Configuration\Administrative Template\System\System Restore

Step-3: Set Turn off System Restore policy to Not configured.

The Alternative Option to Backup and Restore Windows System

If you get errors in the Volume Shadow Copy Service and want to back up the Windows system, you can choose iSunshare CloneGo to create a backup of Windows system. It is super easy for you to backup all system configurations and settings. You can restore it any time you want.

Step-1: Launch CloneGo and click Backup.

Step-2: Choose the system partition as the backup target.

Step-3: Choose the destination to keep the system backup compressed file.

Step-4: Click Start and you will get the backup file sooner.

It is free to download the Windows system backup software. You can have a try now!

Related Articles:

Solved: Windows 10 Backup and Restore not Working

Effective Solutions to Fix Windows 10 Backup Not Working Issues

How to Copy Windows Operating System to WD Mobile Disk

How to Backup Windows 10/8/7 Computer Partition to A New Hard Drive

Are you going to convert dynamic disk to basic disk but find Windows do not support you to directly convert dynamic to basic for the disk. Maybe you have such questions: Unable to convert dynamic disk to basic? Or I can’t convert dynamic disk to basic? The answer here is: you can do it! Here you will learn two ways to convert dynamic disk to basic without losing data. You can use these ways on Windows 10/8.1/Server computers.

Part 1: Back up all your disk partition data to the external hard drive.
Part 2: 2 Free Ways to convert dynamic disk to basic in Windows computer
Part 3: Create volumes on the disk and restore the backup data.

Part 1: Back up all your disk partition data to the external hard drive.

If you want to change the dynamic disk back to basic, the disk should not contain any volume or data so that you need to back all volumes data up before you convert the disk from dynamic to basic. How to create the back of the whole disk with all volumes data orderly? Here, you can use iSunshareCloneGo to back up the volumes one by one to the external hard drive.

The most important part here is to back up the C drive which is also the system partition. You need to connect an external hard drive with the computer in advance. We will take the C drive as an example for you to back up the partition data:

Download and install iSunshare CloneGo on your computer.
Launch CloneGo and choose Backup on the left panel.
Choose C drive to back up.
Select a backup path to the backup file. Here the destination should be on the external hard drive. You can also rename the backup file.
Click the Start button to begin the backup process. As for the backup time, it depends on how much space you used in the partition to back up.
After the process ends, you will get an icg.file on the external hard drive.

Part 2: 2 Free Ways to convert dynamic disk to basic in Windows computer

Here we will introduce two ways for you to convert dynamic disk to basic if you have backed up all the volumes data. You can make good use of either one to finish the dynamic disk to basic conversion.

Way 1: Convert the dynamic disk to basic using Disk Management

Step 1: Access Computer Management and choose Disk Management.

Step 2: Right-click the volumes on the dynamic disk and click the Delete Volume option.

Step 3: Make confirmation of the Delete operation.

Step 4: After all the volumes on the dynamic disk are deleted, you can right-click the disk and click Convert to Basic Disk.

Way 2: Change a dynamic disk to basic using command line

Step 1: Run command prompt as the administrator.

Step 2: Type diskpart and press Enter key.

Step 3: Type list disk and press Enter key. Then you will get all the disks connected with the computer. And you need to identify the dynamic disk number you want to convert to basic.

Step 3: Type select disk <disknumber> and press Enter key. If your disk number is 1, the command line here is “select disk 1”.

Step 4: Type detail disk <disknumber> and press Enter key.

Step 5: Type select volume=<volume number> and type delete volume and press Enter.

Step 6: Type select disk <disknumber> and press Enter.

Step 7: Type convert basic and press Enter. It will help you to convert the selected disk to basic immediately.

use diskpart to convert dynamic disk to basic

Part 3: Create volumes on the disk and restore the backup data.

When you successfully convert the dynamic disk to basic, you need to add new volumes to the disk as you deleted all volumes before converting. You can easily do it in Disk Management.

As for how to restore the data to the newly created volume, you can use CloneGo again to restore the backup icg file to the destination volume: click Restore; set the newly created volume as the restoration destination; add the backup icg file for the original volume; click Start and confirm the Format operation.

restore dynamic volume data to basic disk

Tips: Find the dynamic disk converter to convert dynamic disk to basic

If you think all the steps above waste too much time, you can find the dynamic disk converter to do it within simple clicks. But most of the dynamic disk converter needs you to pay for it. Of course, those tools will take care of your disk data and will not format it after the format is changed.

Related Articles:

Many people get used to attaching restrict password to the PowerPoint presentation so that the content cannot be edited by everyone. If you want to control the content of the restricted read-only PowerPoint, or want to print it, you can make a PowerPoint not read-only with or without password following the below tutorials.

Part 1: Make a PowerPoint not Read Only with Password
Part 2: Remove PowerPoint Read-Only Password with Third-party tool

Part 1: Make a PowerPoint not Read Only with Password

If you have the read-only password to edit the PowerPoint presentation, you can easily remove the editing password and make the PowerPoint not read-only.

Step 1: Open the PowerPoint presentation and enter the restrict password.

Step 2: In the presentation content editing interface, you can edit the text, layout, shape and more. Next, click File > Access on the top left panel. When you save the presentation, you do not need to change the File name. Then, on the right bottom corner, you will find that Tools button. Click it and enter the General Options settings.

Step 3: In the General Options interface, you will find the Password to modify filed. After that, you need to delete the previous password and let it blank. When you finish this setting, click OK to save the change.

Step 4: Next, click the Save button and Yes button to replace the original PowerPoint presentation with this missing password one. After that, you make the read-only PowerPoint not read-only anymore. You can open and edit the content at any time with no need to enter the password.

Part 2: Remove PowerPoint Read-Only Password with Third-party tool

If you forget the restrict editing password and want to edit the PowerPoint document, what to do? Only open the read-only version and do nothing on the content? No, you can remove PowerPoint read-only password with a third-party tool.

iSunshare PowerPoint Unprotect Genius is rightly the PowerPoint read-only password remover that enables users to remove the restrict editing password in minutes. You can remove the restriction of PowerPoint without knowing the previous password. Let’s learn how it works now.

Step 1: Download and install iSunshare PowerPoint Unprotect Genius on your computer.

Step 2: Run the software and import the restricted PowerPoint document by clicking the Addbutton.

Step 3: Click the Start button to remove the editing-password. In the end, you will get the unprotected PowerPoint document in the same location of your source PowerPoint document. And you can directly open it to edit, copy and print the content.

Related Articles:

“I got a Word 2010 document with the editing protection. I want to modify the content and make it myself but it is impossible to do it in read only version. How can I get rid of read only in Word?”

Have been requested to answer a question on a forum, I doubt there must be someone who also wants to do the same thing as the user. Here, you can get two useful methods to unlock a read only Word document without passwordand edit it in your way.

Method 1: Open the read only Word document with WordPad
Method 2: Remove edit protection from Word document with a click

unlock a read only Word document without password

Method 1: Open the read only Word document with WordPad

As is known to all, you can add the modify password to protect the Word document when you save the content. Also, you can enable the editing restriction with a password to lock the editing permission. No matter which way you do, you can open the read-only Word document with WordPad and edit the content.

Step 1: Open the locked Word document with WordPad.

Right-click the Word document with editing protection and click Open with. After that, it will show you several choices; choose WordPadas your option.

open read only Word document with WordPad

Step 2: Edit the content in WordPad.

When the restricted Word document is opened in WordPad, it is unlocked automatically. You can add, delete and change the layout as you like.

Step 3: Save the content.

Go to File > Save and choose the first option. Then your read only Word document is unlocked. You can reopen the Word document with Microsoft Word and edit it directly.

Method 2: Remove edit protection from Word document with a click

If the first method fails to work for you locked Word the document, you can use iSunshare Word Unprotect Genius to remove the edit protection from Word document with just a few clicks.

Step 1: Install iSunshare Word Unprotect Genius on your computer.

It is free for you to download the software from iSunshare official webpage. You just need a few minutes to install it on your computer following the guides. Moreover, it is in a small size.

Step 2: Run the computer and add the locked read only Word document.

After you start the software, you can quickly know what to do next. Click the Add button and select your Word document with the editing protection to open.

Step 3: Remove editing protection from Word document

You just need to click the Remove password button and the software will create another copy of the content without password for you instantly. You can do anything on that unprotected Word document.

remove editing protection from Word successfully

Related Articles:

For convenience, you need to add Gmail account to Microsoft Outlook so that you can get and send the emails in Outlook client. But how can we add Gmail account to Microsoft Outlook via IMAP/POP? How to set the Gmail incoming and outgoing server for Outlook? In this article, you will learn the full steps to configure Gmail account to Microsoft Outlook 2019/2018/2013/2010.

Part 1: Enable Gmail IMAP/POP3 Settings on the Online Account

Part 2: Automatically Add Gmail Account to MS Outlook

Part 3: Manually Set up Gmail Account in MS Outlook

External Tips: How to recover Gmail IMAP/POP account password from Outlook

Part 1: Enable Gmail IMAP/POP3 Settings on the Online Account

Step 1: Login your Gmail account online and click the gear icon and choose Settings.

Step 2: In the Settings window, select Forwarding and POP/IMAP setting. After that, you need to select Enable IMAP as well as enable the POP.

Step 3: Drag down the settings window and click Save Changes button to apply this IMAP setting.

Step 4: Next, open your chrome browser and navigate to https://myaccount.google.com/lesssecureapps, turn on Allow less secure apps option.

Part 2: Automatically Add Gmail Account to MS Outlook

You can simply add your Gmail account and password to Outlook. It will automatically detect other settings for you. Here I will take Microsoft Outlook 2010 as an example.

Step 1: Run Microsoft Outlook and click File on the top left corner, then choose Add Account.

Step 2: Choose E-mail Account service and click the Next button. Then, input your name, email address and password. To continue, click Next .

Step 3: After that, Outlook will complete the setup of your account. When it is finished, you will get the bellowed window, click Finish at the end. Now, you can send and receive Gmail messages directly in MS Outlook.

add IMAP Gmail account in Outlook successfully

Part 3: Manually Set up Gmail Account in MS Outlook

Step 1: Open Outlook and choose File. Then you can select Add Account.

Step 2: In the Add New Account Window, select E-mail Account and click Next. Then, choose Manually configure server settings or additional server types. Click Next to go ahead.

choose Manually configure server settings or additional server types

Step 3: Choose Internet E-mail and click Next.

Step 4: Complete the Internet E-mail settings with the following details.

User Information:

Your Name: The name you set up for the Gmail account.

Email Address: Your Gmail address.

Server Information:

For the IMAP account settings:

Account Type: IMAP

Incoming mail server: imap.gmail.com

Outgoing mail server (SMTP): smtp.gmail.com

For the POP account settings:

Account Type: POP3

Incoming mail server: pop.gmail.com

Outgoing mail server (SMTP): smtp.gmail.com

Logon Information:

User Name: Your full Gmail address

Password: your Gmail password

And it is better for you to choose the Remember password option.

Step 5: Click More Settings and choose the Outgoing Server tab. Then Choose My outgoing server (SMTP) requires authentication.

choose My outgoing sever requires authentication

Step 6: Click the Advanced tab and fulfill the incoming server and outgoing server settings of Gmail.

Incoming server (IMAP): 993

Use the following type of encrypted connection: SSL

Outgoing server (SMTP): 465

Use the following type of encrypted connection: SSL

Incoming server (POP3): 995

Choose This server requires an encrypted connection(SSL)

Outgoing server (SMTP): 465

Use the following type of encrypted connection: SSL

Step 7: Click OK to save the settings and you will be led to the account setting interface. Click Next to build the connection between Gmail and MS Outlook. You will get this successful news in the end.

complete Gmail IMAP connection to Outlook

External Tips: How to recover Gmail IMAP/POP account password from Outlook

Yes, Microsoft Outlook will help to remember your password with the mask. If you forgot what exactly the password is but you can login the account in Microsoft Outlook, how can you recover the Gmail IMAP/POP account password?

With iSunshare Outlook Email Password Genius, everything will turn to be easy. This Outlook email password recovery software will help you to recover the password without damage to your email messages.

. Launch Outlook Email Password Genius. If you do not install this software, download and install it now from here.
You will get all saved email account as well as its details, such as user name and password, in the software interface.
You can save the details to a text file. Of course, for the free trial user, they can only see the first three characters of the password. But the full version users can get the whole.

Related Articles:

Now we are living in an intelligent century and the computer helps us relieve the heavy burden. When we search online, it will help us to save the website accounts as well as passwords automatically. And when you connect the Windows 10 PC/laptop/computer to wireless network, it will automatically save it on your computer. If we forgot the WiFi password saved on Windows 10 computers, how to recover it? This tutorial will help you walk through the simplest way to recover WiFi passwords saved on Windows 10 PC/laptop/computer in minutes.

recover WiFi password saved on Windows 10 PC/laptop/computer

About WiFi Password Recovery Tool for Windows 10

iSunshare WiFi Password Genius is developed to simplify the recovery of WiFi passwords saved on Windows computer, which can help everyone to find and view the wifi password in no time. It gives users the opportunity to retrieve any kind of wifi passwords from computer/laptop with a simple click. Safe and time-saving! Even the people who know little about computer can handle this WiFi password recovery tool.

How to Recover WiFi Password on Windows 10

Step-1: Get WiFi Password Genius on your computer.

You can download and install WiFi Password Genius on your computer from iSunshare official website. This software is in a small size and it just takes you a few minutes to download it.

Step-2: Install WiFi Password Genius.

After ending the download process, you can install the program instantly. Follow the wizard to install the program on the location you like.

Step-3: Start the program and get all WiFi passwords.

When you start the program, it will detect all the saved WiFi passwords immediately. You can get the whole password if you purchase the full version. If you want to do a test of the software, you can connect a new network and click the Refresh button to get its password.

Step-4: Save your passwords on a text file

Some people want to keep the password on a text file so that they can find it directly on the computer. You can click the Save button on the software interface to export the wifi account details to a text file and keep it on anywhere you want.

That’s all. Isn’t it easy to find and view your WiFi passwords saved on Windows 10 PC/laptop/ computer? You can free download the software to have a test now!

Related Articles:

Solved--my laptop is locked how I unlock it

how to back up your iPhone through iTunes

How to recover iTunes backup password from PC

How to unlock an excel spreadsheet when forgot password

How to Access USB Flash Drive with BitLocker Password Protection on macOS

Read a Windows 7 BitLocker Drive in OSX—Solved

3 Methods to Unlock BitLocker USB drive when Password is Lost

Fixed USB Thumb Drive is not Readable by This Computer on MacBook

Can I Open/Unlock BitLocker Encrypted Drive in a Different Computer

How to Backup Windows 10/8/7 Computer Partition to A New Hard Drive

[Free and Safe] How to Clone A Hard Drive in Windows 10/7 to SSD

Solved--Windows 10 System Clone without Reinstallation

How Do I Clone SSD to Larger SSD in Windows 10

How to Clone External Hard Drive to another External Hard Drive in Windows

The Volume Shadow Copy Service is not Working, What to Do?

[Free] How to Convert Dynamic Disk to Basic without Losing Data

How to Make A PowerPoint not Read Only with or without Password

How to Unlock A Read Only Word Document without Password

How to Add Gmail Account to Microsoft Outlook

How to Recover WiFi Passwords Saved on Windows 10 PC /Laptop/ Computer in Minutes